AUSTRALIAN URETHANE SYSTEMS
COATING PRODUCTS
TOPCOATS
TOPCOATS
Our range of top coating products are as follows
Australian Urethane Systems Pty. Ltd. all rights reserved
Polyaspartic
COATINGS
Contact us for details about the different ranges of coating systems available from AUS
Products Product Description Recommended Applications
POLYGLAZE 100 Single Pack, Aliphatic, Polyester / Urethane, Moisture Curing System Finish coat for waterproofing systems. Wear resistant, sand can be broadcast for non slip. Ideal as the upper layer in car park deck systems or similar.
STAINGARD 1110 Two component, aliphatic, polyester  system Used when better chemical and stain resistance is required. Factory floors, animal enclosures, aircraft hangers etc.
STAINGARD 6072
Two component, solvent based, polyaspartic topcoat system When downtime is limited, high gloss levels are required. Applications would be similar to SG1110
STAINGARD 6000
Two component, 100% solids, polyaspartic topcoat system When downtime is limited, high gloss levels are required. Applications would be similar to SG1110
This TABLE sets out the top coating systems that are available to be used as UV resistant colour stable coating systems either directly onto suitably prepared substrates or as a UV stable topcoats with POLYEURO™ 5502F, MPL11, MPL85, 1050H, TUFFSHIELD HAR, and LP-12 products.
The surface preparation for these Polyeuro coatings is as set out in the individual Product Data Sheets and the GENERAL GUIDELINES information.